Using Mio and MioShare

Table of contents

Use MIO-share to upload a GPX to your MIO GPS

This method is recommended by MIO but is currently only available for the most recent devices of the CycloTM Discover Series.

  1. Go to
  2. Sign in/up
  3. Click the orange button at the top right and select Account
  4. Go to the Synchronization settings
  5. Click on Link my account next to the RouteYou logo to connect to RouteYou
  6. Enter the email address of your RouteYou account and create the link
  7. You will now receive an e-mail from RouteYou with a link to complete the connection
  8. A. MIO DISCOVER PLUS: Wireless synchronization is only possible with the Discover Plus. Check on the device whether the WiFi sync function is enabled via Main menu> Settings> WIFI sync.
    B. MIO DISCOVER: For the Discover, synchronization is done via Mio's CycloAgent software. Download after login at Now connect your device to your PC via a USB cable and open the CycloAgent Software. Then it will be checked whether new routes are available for transfer.
  9. You can now consult your routes from your device via Tours

Or watch this video to see how it is done.

Attention! Your Cyclo recordings are also synchronized with your RouteYou account.

If this automatic method fails, we advise you to go for the manual upload.

Manual upload of a GPX to your MIO GPS

This upload is related to the following types of MIO GPS devices

Step 1: Download a GPX route from the RouteYou website to your PC

Step 2: Connect your MIO device to your PC

Step 3: Copy the GPX in the appopriate directory on your MIO device

Step 4: Select the Track on your MIO device

Back to RouteYou

© 2006-2024 RouteYou -